HOME         CATALOGUE          TECH TIPS          SHOW YOUR RIDE         CALCULATORS          ABOUT US         GALLERY        CONTACT US


Edelbrock Performer RPM
An excellent choice for modified street engines where more airflow is required.Good for street and strip applications.
Intake is 7/8"taller than stock.

Order an intake manifold with a set of heads and get the manifold port matched for $200.00!! Reg. $250.00, Save $50.00

Part No. 7156

$ 429.95

$ 601.93

Edelbrock Torker II
This intake is an excellent high performance single plane intake for Pontiacs. This intake is good for Pontiacs with ported heads that require higher airflow.

Order an intake manifold with a set of heads and get the manifold port matched for $200.00!! Reg. $250.00, Save $50.00

CNC runner porting + hand finishing to match our Edelbrock 325 and 335 cfm heads as well as our 300-320cfm KRE D ports $300.00 or $250.00 when intake is ordered with a set of heads

Part No. 5056

$ 419.95

$ 587.93

Northwind Intake
New High Flowing single plane intake manifold, available for 4150 and 4500 series carbs.

This manifold is a much needed addition to the line of intake manifolds we already carry. It's designed for applications requiring a larger runner volume for higher rpm power which until now our only choice was the Victor. The big advantage of the Northwind is it equals or out performs the Victor in many applications while being 1 1/4" shorter. We have some CNC porting programs available and more in the works. Pricing starts at $445.00 for the intake only, or $510.00 with a water crossover.

For more information or recommendations e-mail us at [email protected]

$ 445.00

$ 623.00

CNC machined & ported OEM Q-jet intake
Patterned after Q-jet guru Cliff Ruggles personal modified OEM iron intake, a back to back dyno test showed a 12 hp gain over a stock plenum OEM intake. E-mail us for core availability and price at techsupport or you can send us your OEM iron intake. Below prices do not include an intake core. Water Crossover can be separated at an additional charge, e-mail us for more info at techsupport

$200.00 CNC plenum + hand finish
$300.00 CNC plenum + hand finish + port matched runners to std. intake gasket
$400.00 CNC plenum + CNC port runners + hand finished (we've made over 600hp with these modifications!!!)

NOTE: Add $50.00 for cleaning your intake manifold core, no cleaning charge will be added if your intake is cleaned prior to shipping to us.

NOTE: SD Performance is no longer offering this service on the reproduction or OEM RAIV and 455HO intakes because of too many casting issues

$ 200.00

$ 280.00

  * SD Performance reserves the right to change prices without notification.  
  * Canadian customers, please add GST. BC customers, please add GST and PST