HOME         CATALOGUE          TECH TIPS          SHOW YOUR RIDE         CALCULATORS          ABOUT US         GALLERY        CONTACT US
   

5 axis CNC Porting Service (4)
Books and Manuals (1)
Camshafts and Accessories (8)
Cylinder Heads - Aluminum (6)
Cylinder Heads - Aluminum D-port (2)
Cylinder Heads - Cast Iron (2)
Distributor Gears (2)
Fasteners (2)
Fuel Pumps and Accessories (1)
Gaskets/Seals (14)
Guide Plates (1)
Intake Manifolds (5)
Lifter Bore Brace (2)
Lifters (3)
Limited Time Offers (0)
Mini Starter (1)
Oil Pans/Pumps & Accessories (8)
Pistons (2)
Pushrods (2)
Rocker Arms and Accessories (6)
Timing Sets (1)
Vacuum Pumps and Accessories (3)
Valley Pans (1)
Rocker Arms and Accessories
   





Crower Enduro Stainless Steel Stud Mount Roller Rockers
High Quality Stainless Steel Roller rockers are a great choice for all applications including large Solid Roller applications with very high spring pressures. The very large trunions and bearings will give you many years of trouble free use. Short 7/16" Poly Locks included which will clear stock valve covers in most applications when used with 5/16" thick valve cover gaskets

Part#'s

73627-16 1.5 ratio
73623-16 1.6 ratio
73624-16 1.65 ratio
73621-16 1.7 ratio



$ 549.95

$ 753.43


Harland Sharp 1.5 Aluminum Roller Rockers
High Quality US made aluminum full roller rockers with 7/16" poly locks. A great choice for street/strip combo's.

Note: actual ratio is typically around 1.55.


$ 330.00

$ 452.10


Harland Sharp 1.65 Aluminum Roller Rockers
High Quality US made aluminum full roller rockers with 7/16" poly locks. A great choice for street/strip combo's.

Note: actual ratio is typically around 1.7-1.72.


$ 460.00

$ 630.20


Short 7/16 Poly Locks
Comp Cams short poly locks used to clear stock valve covers.

CC4600-16

$ 39.95

$ 54.73


Crower .500 offset shaft rockers
.500 offset shaft rockers for our CNC wide port Edelbrock heads.
Rocker ratio of 1.65/1.65 (special order)

Part No. 74165

$ 1352.00

$ 1852.24


Crower .500 offset shaft rockers
.500 offset shaft rockers for our CNC wide port Edelbrock heads.
Rocker ratio of 1.7/1.7 (special order)

Part No. 74165

$ 1352.00

$ 1852.24



   
  * SD Performance reserves the right to change prices without notification.  
  * Canadian customers, please add GST. BC customers, please add GST and PST  
  Accepted.